Local Businesses Blog in Texas

Category: Bathtub Refinishing

The Bathtub Refinishing Process

Your bathtub is begging for change and you’re going to grant it in the form of bathtub refinishing.

It would be nice to know the process involved in bathtub refinishing. You might not want to do it yourself and hire professionals like Grapevine Bathtub Refinishing but at least you know the steps involved in the process. So let’s take a closer look at the bathtub refinishing process.

Bathtub Refinishing Grapevine TX

There are two ways to refinish a bathtub – Professional and Do-It-Yourself (DIY) – we’ll take a quick look at both methods.

Professional Bathtub Refinishing Process

  • The bathtub is cleaned thoroughly.
  • Areas that won’t be refinished will be covered. Bathtub professionals will make sure that precautions are taken so mess such as overspray is avoided.
  • To avoid any messy situations, covers and drop-down clothes are placed on all the furniture as well as the cabinets found in the toilet.
  • Ensure there is proper ventilation by setting up a ventilation fan. This will direct the odor and overspray outside.
  • All of the bathtub’s hardware will be removed, including the faucet and drain fittings.
  • Roughen up the original finish of the bathtub through light sanding. Use a vacuum to remove the debris from sanding.
  • Use filler for chipped or worn areas. Sand the surface to smoothen and prepare it for the primer.
  • As many as three coats of primer will be applied to the bathtub with the use of a sprayer. Allow the primer to dry.
  • About three to four layers of a top-coat mixture will be applied next using a sprayer. Allow it to cure.
  • Buff the bathtub’s coating, if it’s needed. There are bathtub refinishers that use processes that do not require any buffing. But in a lot of cases, they will return for final buffing.

DIY Bathtub Refinishing

Do-It-Yourself or DIY bathtub refinishing does not cost as much as the professional variety. However, not everybody is capable of doing it. And remember, it’s not as durable and lasting as the one done by professionals.

  • Clean the tub carefully.
  • All the caulking must be removed from the tub.
  • Cover the area that surrounds the bathtub. Make sure to provide adequate ventilation by opening any windows or setting up fans in the work area itself.
  • Use etching powder and water to dull the tub’s old finish. This will make it easier for the new coating to bond to the tub. Rinse it after.
  • Roughen the tub by sanding it while it’s still wet. This will also improve bonding.
  • When the tub is sufficiently dry, apply a coat of primer by using a roller and then allow it to dry.
  • Apply the epoxy coating with the use of a roller. Start at the side before moving on to the horizontal surface of the tub. Move on to the tub’s bottom before finishing at the edges.
  • Apply a second coating as soon as you finish the first one.
  • Make sure it’s well ventilated as you let it cure for the next 48 hours.
  • The faucet and fixtures should be reinstalled before caulking the tub. Let it cure overnight before using it.

These are the two variations of the bathtub refinishing process. Some details or steps might differ, depending on the bathtub refinisher, but this is basically the structure of both the professional and DIY methods.

The Benefits of Professional Bathtub Refinishing

Your bathtub needs a major makeover. Changes are in the offing but you don’t want to go too far as to replace it with a new one. In your mind, there’s no need to do that yet. So you made a decision to refinish your bathtub instead.

However, you also made one equally important decision along with it. You’re not going to do it yourself. Instead, you’re going to entrust your bathtub to the hands of bathtub refinishing professionals.

Bathtub Refinishing Dallas TX

You made the decision to leave it to the pros since you know for a fact that they would do much better at it. Much more than you’ll ever be capable of doing on your own. But what are the specific benefits of making that choice?

Below are some of the main benefits of professional bathtub refinishing:

Quality Service

The number one benefit of professional bathtub refinishing is the high quality of the service that you’re going to get. There are a lot of homeowners who think they can do it themselves and choose to go DIY with their bathtub refinishing but Dallas Bathtub Refinishing proves that its better to find a professional company to do it for you. They purchase a refinishing kit and try to work on it themselves. But after a short while, they realize that they’re not doing as good a job at it as they thought they would. The sooner you realize that you shouldn’t be doing it yourself, the better. And don’t think about going for a replacement since it’s a lot more expensive. Plus, it doesn’t guarantee a quality bathtub.

Cost-Effective and a Time Saver

As we said above, getting a new bathtub as a replacement for your old one is an expensive option. So refinishing is an automatic money-saving option for homeowners that have limited budgets. And they’re not sacrificing on quality as refinishing is often a far better option. Some of the newer bathtubs are not as high quality as the ones made in the past. So if you’re going to have your bathtub refinished, you’re actually saving money while not sacrificing on quality. Then there’s the speed factor, it doesn’t take as much time to replace the tub and you can use your new bathtub after a day or two.

No Worries On Your Part

Working with professionals means that you don’t have to worry about a thing. You can simply sit back and relax as you await the time when you can use your bathtub once more and it doesn’t take too long at all. This is important since bathtub refinishing can be quite a complicated process. There’s no need for you to worry about every little detail about that process. From the right coating mixture to the time it would take to get the bathtub ready. When the professional bathtub refinisher is done with your bathtub, it’s ready for use. You can use it there and then.

These benefits of professional bathtub refinishing certainly make a lot of sense. It should help convince anyone that it’s the right path to take. After all, why entrust your bathtub to anyone else other than those who are the real experts at making it as good as new.

What You Need to Know About Bathtub Refinishing

Your good old bathtub needs an upgrade. To be clear, you’re thinking about an upgrade and not a replacement. Those are two different things and you’re already past considering which of the two is for you. So an upgrade is your choice in the form of bathtub refinishing.

Bathtub Refinishing Arlington TX

Is bathtub refinishing truly your best option? It might seem like the best option at first, but you still need to learn more about it. A good look at the details of this process will certainly help and not just for you but for others who are in the middle of making the same decision.

So below we talk about what you need to know about bathtub refinishing. Hopefully, by the end, anyone who reads will be able to make an informed decision of their own!

The Cost of Bathtub Refinishing

What is the cost of refinishing your bathtub? We got to start with the cost because most homeowners have this as their main concern. They want to know if their budget is enough or if they will need to wait a bit longer before their bathtub could be refinished.

The usual cost of bathtub refinishing is from $300 to $600. This price range is dependent on the process used as well as the area. Compare that to the total cost of a bathtub replacement, which would set you back around $1,500. That’s for the whole process, even though the new tub itself is going to cost about $150.

The Bathtub Refinishing Process

Looking at the bathtub refinishing process, there are three major steps involved in it. The three steps are as follows:

  • The first step that the technician will do is to strip off the tub’s old finishes. Then the tub is going to be sanded to achieve a smooth surface.
  • The next step is to repair any cracks, holes, or rust spots that the bathtub has.
  • The last step will involve the application of a primer, several layers of coating, plus a sealant. Owners will only need to wait from one to three days and then they can use the tub again. 

If you’re wondering, a newly refinished bathtub can be used again for the next 10 to 15 years. That’s a long time and certainly makes a good case for the fact that bathtub refinishing is worth it.

When to Refinish Your Bathtub

When is the best time to refinish your bathtub? Well, when it’s old and worn out of course. But don’t wait too long or for your tub to be overly damaged before you do it.

However, it’s okay to subject your very old tubs to refinishing. In fact, very old tubs are probably the best fit for the refinishing process. The based on Arlington Bathtub Refinishing, the main reason for this is the high quality of the bathtub’s made in the past compared to what’s being produced today. 

What this means is that you need to carefully consider several factors when deciding to refinish or to replace them. You might be better off replacing the newer models than putting them through the refinishing process.

At least, you’re equipped with the knowledge of what you need to know about bathtub refinishing.

Powered by WordPress & Theme by Anders Norén