Your bathtub is begging for change and you’re going to grant it in the form of bathtub refinishing.

It would be nice to know the process involved in bathtub refinishing. You might not want to do it yourself and hire professionals like Grapevine Bathtub Refinishing but at least you know the steps involved in the process. So let’s take a closer look at the bathtub refinishing process.

Bathtub Refinishing Grapevine TX

There are two ways to refinish a bathtub – Professional and Do-It-Yourself (DIY) – we’ll take a quick look at both methods.

Professional Bathtub Refinishing Process

  • The bathtub is cleaned thoroughly.
  • Areas that won’t be refinished will be covered. Bathtub professionals will make sure that precautions are taken so mess such as overspray is avoided.
  • To avoid any messy situations, covers and drop-down clothes are placed on all the furniture as well as the cabinets found in the toilet.
  • Ensure there is proper ventilation by setting up a ventilation fan. This will direct the odor and overspray outside.
  • All of the bathtub’s hardware will be removed, including the faucet and drain fittings.
  • Roughen up the original finish of the bathtub through light sanding. Use a vacuum to remove the debris from sanding.
  • Use filler for chipped or worn areas. Sand the surface to smoothen and prepare it for the primer.
  • As many as three coats of primer will be applied to the bathtub with the use of a sprayer. Allow the primer to dry.
  • About three to four layers of a top-coat mixture will be applied next using a sprayer. Allow it to cure.
  • Buff the bathtub’s coating, if it’s needed. There are bathtub refinishers that use processes that do not require any buffing. But in a lot of cases, they will return for final buffing.

DIY Bathtub Refinishing

Do-It-Yourself or DIY bathtub refinishing does not cost as much as the professional variety. However, not everybody is capable of doing it. And remember, it’s not as durable and lasting as the one done by professionals.

  • Clean the tub carefully.
  • All the caulking must be removed from the tub.
  • Cover the area that surrounds the bathtub. Make sure to provide adequate ventilation by opening any windows or setting up fans in the work area itself.
  • Use etching powder and water to dull the tub’s old finish. This will make it easier for the new coating to bond to the tub. Rinse it after.
  • Roughen the tub by sanding it while it’s still wet. This will also improve bonding.
  • When the tub is sufficiently dry, apply a coat of primer by using a roller and then allow it to dry.
  • Apply the epoxy coating with the use of a roller. Start at the side before moving on to the horizontal surface of the tub. Move on to the tub’s bottom before finishing at the edges.
  • Apply a second coating as soon as you finish the first one.
  • Make sure it’s well ventilated as you let it cure for the next 48 hours.
  • The faucet and fixtures should be reinstalled before caulking the tub. Let it cure overnight before using it.

These are the two variations of the bathtub refinishing process. Some details or steps might differ, depending on the bathtub refinisher, but this is basically the structure of both the professional and DIY methods.